Skip to main content

 

The Department of Agriculture, Water and the Environment have published changes to the 2021/22 BMSB seasonal measures. Please copy the below link into a browser to read full compliance to be met by your logistic teams and suppliers at origin.

The list of target risk countries will now include Poland in addition to target risk countries identified for the 2020-21 BMSB risk season.

Emerging risk countries for the 2021-22 BMSB risk season include Belarus, Malta, Sweden, United Kingdom, and Chile.

For the 2021-22 BMSB risk season, measures will apply to:

  • certain goods manufactured in, or shipped from target risk countries, and/or
  • vessels that berth at, load, or tranship from target risk countries

The measures apply to goods that have been shipped between 1 September 2021 and 30 April 2022 (inclusive) .

Target high risk goods shipped between 1 September 2021 and 30 April 2022 (inclusive) require mandatory treatment.

The Department guidelines can be found by accessing this link https://www.agriculture.gov.au/import/before/brown-marmorated-stink-bugs.

 

Target Risk Countries

The following countries below have been categorised as target risk:

  • Albania
  • Andorra
  • Armenia
  • Austria
  • Azerbaijan
  • Belgium
  • Bosnia and Herzegovina
  • Bulgaria
  • Canada
  • Croatia
  • Czechia
  • France
  • Japan (heightened vessel surveillance will be the only measure applied).
  • Georgia
  • Germany
  • Greece
  • Hungary
  • Italy
  • Kazakhstan
  • Kosovo
  • Liechtenstein
  • Luxembourg
  • Montenegro
  • Moldova
  • Netherlands
  • Poland
  • Portugal
  • Republic of North Macedonia
  • Romania
  • Russia
  • Serbia
  • Slovakia
  • Slovenia
  • Spain
  • Switzerland
  • Turkey
  • Ukraine
  • United States of America

Any target high risk or target risk goods which are manufactured in or shipped from the target risk countries will be subject to the BMSB seasonal measures. Any vessel that berths at, loads, or tran-ships from the target risk countries is also subject to the BMSB seasonal measures

Goods Subject to the measures

Target high risk goods

Goods that fall within the following tariff classifications have been categorised as target high risk goods and will require mandatory treatment for BMSB risk.

  • 36 – Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations
  • 44 – Wood and articles of wood; wood charcoal
  • 45 – Cork and articles of cork
  • 57 – Carpets and other textile floor coverings
  • 68 – Articles of stone, plaster, cement, asbestos, mica or similar materials
  • 69 – Ceramic products – including sub chapters I and II
  • 70 – Glass and glass ware
  • 72 – Iron and steel – including sub chapters I, II, III, IV
  • 73 – Articles of iron or steel
  • 74 – Copper and articles thereof
  • 75 – Nickel and articles thereof
  • 76 – Aluminium and articles thereof
  • 78 – Lead and articles thereof
  • 79 – Zinc and articles thereof
  • 80 – Tin and articles thereof
  • 81 – Other base metals; cermets; articles thereof
  • 82 – Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
  • 83 – Miscellaneous articles of base metals
  • 84 – Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
  • 85 – Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
  • 86 – Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds
  • 87 – Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof
  • 88 – Aircraft, spacecraft, and parts thereof
  • 89 – Ships, boats and floating structures
  • 93 – Arms and ammunition; parts and accessories thereof

Target risk goods

Goods that fall within the following tariff classifications have been categorised as target risk goods and will not require mandatory treatment. Target risk goods will however be subject to increased onshore intervention through random inspection.

  • 25 – Salt; sulphur; earths and stone; plastering materials, lime and cement
  • 26 – Ores, slag and ash
  • 27 – Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
  • 28 – Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes – including sub chapters I, II, III, IV and V
  • 29 – Organic chemicals – including sub chapters I, II, III, IV, V, VI, VII, VIII, IX, X, XII and XIII
  • 31 – Fertilisers
  • 38 – Miscellaneous chemical products
  • 39 – Plastics and articles thereof – – including sub chapters I and II
  • 40 – Rubber and articles thereof
  • 46 – Manufactures of straw, of esparto or of other plaiting materials, basket ware and wickerwork
  • 47 – Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard
  • 48 – Paper and paperboard; articles of paper pulp, of paper or of paperboard
  • 49 – Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans
  • 56 – Wadding, felt and nonwovens; special yarns; twine, cordage, ropes and cables and articles thereof

For all other goods that are not categorised as target high risk and target risk goods, BMSB seasonal measures do not apply. However, these goods may be subject to the measures if they are part of a container or consignment that contains target high risk or target risk goods.

Treatment of target high risk goods

  • Target high risk goods treated in target risk countries must be treated by a registered offshore treatment provider approved under the Offshore BMSB Treatment Providers Scheme.
  • Treatments conducted by an unapproved treatment provider in a target risk country will not be recognised as valid and the goods will be subject to onshore treatment (if permitted) or be directed for export.
  • Treatment providers in other countries who intend to conduct BMSB treatments for goods that are manufactured in any of the target risk counties are also encouraged to register under the offshore treatment provider’s scheme.
  • Treatment certificates from providers in non-target risk countries who do not register will be accepted, however these goods will be subject to increased intervention on arrival compared to those treated by approved treatment providers.

Break bulk goods

  • Mandatory offshore treatment of target high risk goods shipped as break bulk cargo will be required. Onshore treatment is not permitted.
  • Goods shipped in open top containers (including in gauge) or on flat rack containers are also considered to be break bulk.
  • Untreated break bulk will be directed for export. Where these goods are identified prior to a vessels arrival into Australia, they will be denied discharge from that vessel.
  • Automated Entry Processing for Commodity (AEPCOMM) arrangements for BMSB is permitted for break bulk goods. See relevant BICON commodities for assessment and outcomes.
  • FCL containers that have been modified, such as those used to house in-built power generators, etc. are no longer sealed six hard sided containers and are considered to be break bulk cargo.

Containerised goods (FCL, FCX)

  • Containerised cargo arriving in sealed six hard sided containers with target high risk goods can be treated offshore, or onshore at the container level.
  • The department classifies refrigerated containers (operating and non-operating) and hard top sealed containers (ISO22U6/ISO22UP, ISO42U6/ISO42UP and ISO45U6/ISO45UP) the same as six hard sided sealed containers.
  • FCL containers that have been modified, such as those used to house in-built power generators, etc. are no longer sealed six hard sided containers and are considered to be break bulk cargo as per above.
  • Goods are to be treated within the container. Deconsolidation or removal of goods will not be permitted prior to treatment. No exemptions for deconsolidation or segregation on arrival will be considered by the department.
  • Consideration must be given to ensure containers are packed in a manner that will enable effective onshore treatment at the container level where required, to avoid possible export of the container.
  • AEPCOMM arrangements for BMSB is permitted for containerised goods shipped as FCL (Full Container Load) and FCX (Full Container Consolidated). See relevant BICON commodities for assessment and outcomes.
  • To demonstrate goods were sealed inside a container prior to 1 September 2021 or after treatment, a BMSB sealing declaration must be provided with the lodgement. This document is required where:
    • Goods were containerised prior to 1 September 2021, but shipped after this date, or
    • The bill of lading does not state the shipped-on board date, or
    • Goods were sealed inside the container within 120 hours of treatment occurring offshore.
  • Supporting documentation must be completed and signed by either the exporter, freight forwarder, or shipping company at the port of origin.

Air Cargo

Due to detections of live BMSB in previous season, air cargo arriving between 1 September and 30 November 2021 (inclusive) from USA and Italy, containing target high risk chapters 84, 85, 86 and 87 will be subject to random verification inspections.

Random onshore verification inspections

  • All target high risk and target risk goods will be subject to random verification inspections and will be directed for onshore treatment if BMSB is detected.
  • Where goods are shipped as break bulk, random inspections are required to be conducted at a Class 21.1AA. For goods shipped in flat rack and open top containers, these inspections will be able to be conducted at Class 1.1 and Class 1.3 AA.
  • All random onshore verification inspections are required to be completed in a metropolitan location.
  • The department will continue to review the changing pest status of BMSB and will be undertaking a lower rate of random onshore inspections on goods from emerging risk countries (watch list countries) to verify pest absence in goods.
  • All goods must still meet the standard import conditions in the department’s biosecurity import conditions database (BICON) for all other biosecurity risks.

Treatment options

There are three approved treatment options for BMSB treatment.

The approved treatments are:

Heat

For all goods types and sizes

  • 56°C or higher at the coldest surface of the goods, for a minimum of 30 minutes
    or
  • Alternative option for individual goods weighing less than 3000 kg shipped as break bulk only, 60°C or higher at the coldest surface of the goods, for a minimum of 10 minutes

Note: Individual goods shipped as break bulk weighing less than 3000kg treated at 60°C for 10 minutes require evidence within shipping documentation that they are less than 3000kg for these treatments to be accepted.

Methyl Bromide

  • A dose of 24 g/m³ or above, at 10°C or above, for a minimum of 12 hours (but less than 24 hours), and a minimum end point reading of 12 g/m³
    or
  • A dose of 24 g/m³ or above, at 10°C or above, for 24 hours or longer, and a minimum end point reading of 8 g/m³

*Note:

  • All start time concentration readings must be above 24 g/m³.
  • Dose increases to compensate for temperatures less than 10°C is NOT permitted.
  • Topping up with additional fumigant at the end of treatment is NOT permitted.
  • If the concentration of fumigant falls below the minimum end point reading at any point during the treatment, the treatment has failed.

Sulfuryl Fluoride

  • A dose of 24 g/m³ or above, at 10°C or above, for a minimum of 12 hours (but less than 24 hours), and a minimum end point reading of 12 g/m³
    or
  • A dose of 24 g/m³ or above, at 10°C or above, for 24 hours or longer, and a minimum end point reading of 8 g/m³

*Note:

  • All start time concentration readings must be above 24 g/m³.
  • Dose increases to compensate for temperatures less than 10°C is NOT permitted.
  • Topping up with additional fumigant at the end of treatment is NOT permitted.
  • If the concentration of fumigant falls below the minimum end point reading at any point during the treatment, the treatment has failed.

Sulfuryl Fluoride – Using third-party system*

  • Achieve a CT of 200 g-h/m³ or more, at 10°c or above, for 12 hours or longer, with a minimum end point reading of 12 g/m³
    or
  • Achieve a CT of 200 g-h/m³ or more, at 10°C or above, for 24 hours or longer, with a minimum end point reading of 8 g/m³

*Note: The approved stewardship program operators and their third party programs are:

  • Douglas Products or their agents – FumiGuide
  • Ensystex II, Inc. (USA) – Fumicalc
  • Barcan Barcan Pest Control & Fumigation Co. (Barcan ilaclama Fumigasyon Tic. Ltd.Sti.) (Turkey) – FumiTrack

Topping up with additional fumigant at the end of treatment is NOT permitted. If the concentration of fumigant falls below the minimum end point reading at any point during the treatment, the treatment has failed.

Treatment minimum standards

There are set minimum standards for the application of BMSB treatments. Treatments applied for biosecurity purposes are part of managing the risk of introducing exotic pests and diseases.

It is important that treatment providers understand these requirements as treatments to manage risk are only effective when conducted correctly. These standards outline best practice methodologies for applying biosecurity treatments.

Onshore treatment

Where onshore treatment of goods is permitted, you can find a list of approved arrangement providers on the department’s website.

Offshore treatment

The Offshore Brown Marmorated Stink Bug (BMSB) Treatment Providers Scheme (the scheme) sets out the department’s registration and compliance requirements for BMSB treatment providers, including compliance with applicable treatment methodologies.

Treatment providers that were registered under the scheme during the 2020-21 season must complete a renewal application for the 2021-22 season. The offshore treatment provider application form is available on the department’s Offshore BMSB treatment providers scheme webpage.

Treatment providers in target risk countries

All BMSB treatment providers in target risk countries must first register and be approved under the scheme by the department prior to treatment. Treatments conducted by an unapproved treatment provider in a target risk country will not be recognised as valid and the goods will be subject to onshore treatment (if permitted) or be directed for export.

Treatment providers in non-target risk countries

Treatment providers in other countries who intend to conduct BMSB treatments for goods that are manufactured in any of the target risk counties are also encouraged to register under the offshore treatment provider’s scheme.

Treatment certificates from providers in non-target risk countries who do not register will be accepted, however these goods will be subject to increased intervention on arrival compared to those treated by approved treatment providers.

Treatment providers in non-target risk countries who perform multiple BMSB treatments during the season must join the Offshore BMSB Treatment Providers Scheme.

Fraudulent certificates

For treatments conducted in target risk countries, we will only accept BMSB treatment certificates from the approved list of treatment providers.

The department continues to improve its systems to monitor and detect the use of fraudulent certificates and will identify consignments that arrive in Australia with fraudulent documentation.

Any consignment identified with a fraudulent certificate or with a certificate from a treatment provider in a target risk country that is not approved will be directed for onshore treatment (if permitted) or exported.

Should you have any queries relating to this subject matter please contact our customs department directly.

 

sydcustoms@specificfreight.com.au

melcustoms@specificfreight.com.au

 

 

homephone